AUTONET TV

Straight to the Point (Alignment Signs of Problems)

It’s just common sense that your vehicle will drive better if all the wheels are lined up with each other and the road the way the engineers intended.  When they’re not, that is called being out of alignment.   Here are some signs that your alignment has problems.

• Your steering wheel isn’t straight when your vehicle goes straight down a straight road. This one’s pretty easy to notice.  If your vehicle’s logo on the wheel is tilted, that’s probably not the way designers wanted it to be. Bring it in and have us check it out.
• Your steering wheel is vibrating on a smooth road or when you are accelerating.  While this could be caused by several different things, one possibility is misalignment.  If your steering wheel is shaking, it should be examined by a trained technician.
• Your vehicle is pulling to one side without you wanting it to.  Sometimes the configuration of the road will cause it to pull slightly left or right.  But if you find yourself constantly correcting course to keep your vehicle headed straight down the road, that’s worth having us look at your alignment.
• You’re going through tires like there’s no tomorrow. The tread on your tires should be wearing nice and evenly from the outside to the inside of the tire.  If the wear isn’t even, it could be your vehicle needs an alignment.

We have equipment designed to quickly and accurately measure your vehicle’s alignment.  We can make precise adjustments to make sure you are headed straight where you want to go.  Have your alignment checked regularly. It can help prevent more serious problems in the future and make your vehicle drive as beautifully as you remember it used to.

Auto Authority LLC
804 Witzel Ave
Oshkosh, WI 54902
920-231-1016
http://www.autoauthorityoshkosh.com

Road Trip? Check! (Trip Inspection)

After months of postponing travel far away from home, a lot of us can't wait to hit the road and scream "Road Trip!" again.  But how long has it been since the vehicle you're planning on taking has had a thorough inspection? And is it roadworthy for several days on the highway? Time to schedule a professional trip inspection in our service center. 

When it comes to long trips, before you go, make sure you can stop.  We can perform a break inspection.  Our technician will visually inspect your brakes for wear and how much life is left in the brake pads and rotors.  They'll also check your brake lines and fluids for fitness and fill.

If it's going to be a long trip, it's important that your engine stays lubricated.  The technician will see when the last time you had an oil change, check the levels and inspect the system for leaks.  If you are close to needing an oil change, it's best to have it done before the trip because no one wants to interrupt a vacation with an oil change in a strange place.  It's also better for your engine to have fresh, clean oil rather than driving with dirty, worn-out oil.

Comfort in any vehicle depends partly on the suspension system.  Our technician can examine shocks and struts so you can avoid an uncomfortable and potentially unsafe journey.  Oh, and you'll definitely want to make sure your wheels are aligned.  A long trip in an out-of-alignment vehicle can be a driving nightmare with potential steering problems and tire damage. 

A couple of little things some drivers take for granted are the engine air filter and wiper blades.  A dirty air filter can cost you money by reducing fuel economy; it adds up on a long trip.  And worn-out wiper blades can make visibility while driving in a rainstorm a blinding, unsafe adventure that you never want to experience, especially in unfamiliar territory.

If you're in the habit of having your vehicle regularly maintained, many of these items may be in excellent condition.  But considering the extra stresses a long road trip places on any vehicle, it's nice to have a set of our trained eyes give your vehicle a closer look. That way you'll be able to gaze YOUR eyes on sights like the Leaning Tower of Niles or the Gopher Hole Museum. 

Auto Authority LLC
804 Witzel Ave
Oshkosh, WI 54902
920-231-1016
http://www.autoauthorityoshkosh.com

Giving CV Joints the Boot! (CV Joint and Boot Replacement)

Ever wonder how your vehicle’s transmission is connected to your wheels? After all, when you hit a pothole or some other uneven part of a road’s surface, there has to be something that can maintain the connection between the transmission and the wheel yet keep everything moving at the same speed. 

That very cool device is called a CV joint, a kind of driveshaft running to each wheel.  The CV stands for constant velocity because it keeps the drive wheels moving at a constant speed (velocity).  They’re used mostly on front-wheel drive vehicles but also in rear-wheel and all-wheel drive vehicles.

The joints move up and down and adjust to bumpy surfaces.  Plus, they are covered in a rubber boot which protects them from road debris and also holds lubrication in.  There’s a CV joint and boot on the transmission side and one on the wheel side.  Unfortunately, the spot that usually fails first is that rubber protective cover (the boot).  After a lot of wear, tear, bumps, road hazards, heat, and you name it, the rubber rips and the lubrication leaks out.  At that point, it must be replaced. 

Here are signs to tell if your CV joint is bad.

• Your vehicle is pulling to one side as a wheel loses power or you feel a vibration while driving.
• You see grease on the inside or edge of your tires.  
• Your front tires won’t point in the same direction.
• You hear grinding or clicking when you turn.

Sometimes if a broken boot early is caught early, a technician can pack in new grease and replace just the boot.  But if the lubrication has leaked out and the joint is already wearing badly, the CV and boot both have to be replaced.  Give your vehicle the boot (as in a new boot) and CV joint, and you’ll be back on the road to your next destination.

Auto Authority LLC
804 Witzel Ave
Oshkosh, WI 54902
920-231-1016
http://www.autoauthorityoshkosh.com

Them's the Brakes (Brake Rotor Resurfacing)

Your vehicle's brakes wear out.  It's inevitable. You'll notice it when you step on the brake pedal and feel it harder to stop, or there's vibration when you are braking. 

Most modern vehicles have disc brakes that each use a brake pad that press on a disc (disc brakes!) called a rotor.  The friction between them enables you to stop, and each time you do a little bit of the pad and the rotor wears down.

The original brakes on vehicles used a rotor that was thick enough to last through at least two replacements of the pads.  But vehicle manufacturers who want to save costs and weight now make them thinner, and sometimes the rotors have to be replaced after the first pad replacement.  But not always.

Vehicle manufacturers specify a minimum thickness to provide safe braking.  Sometimes rather than having to have your rotors replaced, they can be put on a lathe and resurfaced.  In other words, the surfaces of the disc can be slightly shaved off so the surface is flat and doesn't wobble. 

Whenever you bring your vehicle in to have the brakes checked, the technician will measure the thickness of the rotors to see if they can be resurfaced without leaving them too thin for safe braking. If they can, with the right tools and skill, the rotors can be resurfaced.  If not, the rotors should be replaced. 

Discuss the options with your service advisor.  Our service center can recommend replacements that are designed to help stop your vehicle as well as or better than the vehicle's original rotors.

Either way, keep in mind that keeping your brakes in top condition can supply the margin of safety that may one day save your life or the lives of those around you.

Auto Authority LLC
804 Witzel Ave
Oshkosh, WI 54902
920-231-1016
http://www.autoauthorityoshkosh.com

Oil's Well That Ends Well (Oil Change Grades and Weight)

Changing your oil regularly is one of the most important things you can do to keep your vehicle running well.  And knowing the right type of oil to use is also very important. 

Engine oil is classified by weight, but it doesn't refer to how much the oil would weigh if you put it on a scale.  It refers to viscosity, or how easily the oil flows through the engine.  Most engines operate normally at around 210°F/99°C.  The viscosity, or weight, is assigned a number by how well it flows at that temperature.  The lower the number, the more freely it flows. 

Most vehicle engines use what's called a multigrade oil which behaves differently in different temperatures. Multigrade oils have a "W" in their viscosity number that you may have seen on a bottle of oil, something like 5W30.  The W stands for winter and shows how freely it flows in colder temperatures.

That means a 5W30 oil will behave like a 5 weight oil in lower temperatures (less viscous or thinner) and a 30 weight oil in warmer temperatures (more viscous or thicker).  That's important on a cold day because the oil needs to behave like a thinner oil when you start your engine since it need to lubricate engine components immediately to protect the metal components. Then as the engine warms up, it behaves like a thicker oil to prevent friction among those parts.  Pretty neat trick, right?

The type of oil you use can differ depending on what type of climate you operate your vehicle in and how your vehicle is used (carrying big loads, towing, etc.). Your owner's manual contains several different recommendations based on these factors.  Your service advisor can recommend the right oil for your needs.  Like Shakespeare said, "Oil's well that ends well."

Auto Authority LLC
804 Witzel Ave
Oshkosh, WI 54902
920-231-1016
http://www.autoauthorityoshkosh.com

Bad Vibrations (Brake Rotor Replacement)

If you’ve ever stepped on your brake pedal and felt your vehicle vibrate, that’s a signal that you shouldn’t ignore.  A pulsating brake pedal is a sign that something is wrong.  Braking action should be smooth, sure, and quiet, not shaky and noisy.

Most newer vehicles have disc brakes, called that because they have a round, flat disc connected to each wheel.  Those discs are the rotors. Other parts called brake pads are squeezed against those discs when you press on the brake pedal.

Remember that vibration we mentioned? That can be caused by the rotor not having a straight, true surface. Rotors can heat up from friction and warp.  They can become thinner from constant wear.  Rotors can rust from the elements they’re exposed to, such as rain, snow ice, and salt.  They can get grooves in them from so many contacts with the pads. 

The signs of worn rotors are vibrations, grooves on the rotor (which you can see sometimes through open spots in the wheel) noise such as squealing or scraping when you brake, and increased stopping distance.   

While it used to be common for rotors to be machined (shaved down to restore their flat surface), newer vehicles have thinner rotors, so your service adviser may suggest you replace rotors when they start showing signs of significant wear.

Brakes are important safety equipment for every vehicle.  They enhance your control while driving, so it’s important that they be regularly inspected and maintained.  A good time is when you have your tires rotated. A technician can then look at all components of your brakes and recommend any service you may need to keep your brakes in top shape.

Auto Authority LLC
804 Witzel Ave
Oshkosh, WI 54902
920-231-1016
http://www.autoauthorityoshkosh.com

A Clean Start (Battery Cleaning)

You may be fanatical about keeping the outside of your vehicle clean.  But what about what's under the hood? Have you ever thought about how dirt and grime may be affecting your engine's components?

One of the most important parts under your hood to keep clean is your vehicle's battery.  With a daily barrage of dirt and moisture, outside parts of your battery can corrode, namely the cables and terminals.

Gases vented by batteries can also promote corrosion.  That can create connection problems and affect your vehicle's electrical system.  If corrosion is not cleaned off, it may damage wires and terminals so badly that they will stop properly conducting electricity.  At that point, they may need replacing.

When you bring your vehicle to us for a battery inspection and cleaning, we will remove any corrosion and put corrosion-resistant protection on each post. A technician will also visually inspect your battery.  Plus, we can test how much life is in your battery as part of a more comprehensive battery service. 

Batteries don't last forever and should be regularly cleaned, inspected, and tested.  Usually, they'll need to be replaced anywhere from three to five years after they were first installed, but their lifespan depends on how, where, and how much you drive.  Your battery is a very important component of your vehicle.  Keep yours in tip-top shape, and it's less likely to let you down when you need it most.

Auto Authority LLC
804 Witzel Ave
Oshkosh, WI 54902
920-231-1016
http://www.autoauthorityoshkosh.com

I Can See Clearly (Wiper Blade Replacement)

Warm weather can bring severe storms, and when the rain is coming down hard, that's one time you really need to be able to see as clearly as possible out your windshield.  Having wiper blades that are fit for the job are important to maintain that safe view.

Maybe you live in a climate where you use blades made for winter weather and you have haven't changed them since the weather changed.  Those blades are made of heavier materials and don't work as well in warmer temperatures. Blades made for warm temperatures are lighter and clear water better in the warmer months.

The general rule of thumb is you should change your blades every six months, but if you use them a lot, you might have to change them more often.  A couple of signs that your blades need changing? If you are seeing streaks on the glass or hearing a chattering sound when your wipers are working, time for a new pair.

Wiper blades have cleaning windshields on vehicles for more than 100 years.  The original designs have a multi-part frame that are better for flatter windshields.  But newer vehicle designs now have curvier windshields, so a more recent design is called a blade wiper.  It's designed to conform better to the glass so cleans it better. 

Conventional wipers also aren’t as aerodynamic as blade wipers. Wind buffeting can reduce the pressure they apply on the rubber to the glass.  With a spoiler as part of their design, blade wipers are pressed more tightly to the glass, an advantage in clearing water from it.

Another option is hybrid blades, essentially a conventional blade with a plastic shell around the wiper's frame that makes it more aerodynamic and, some say, gives it a more aesthetic look. 

There are lots of choices, so consult our service professionals for a recommendation on which blade fits your needs—and budget—best.  Keep your eyes on the road and keep your windshield sparkling clean, rain or shine.

Auto Authority LLC
804 Witzel Ave
Oshkosh, WI 54902
920-231-1016
http://www.autoauthorityoshkosh.com

Differential Service

When you're driving and turn a corner, you probably aren't aware of all that's going on with your wheels.  The outside wheels have a longer distance to travel than the inside wheels, so there are gears that allow the wheels to go at different speeds when you turn. 

That set of gears is called a differential.  In front-wheel drive vehicles, it's by the transmission and called a transaxle.  Rear-wheel drive vehicles have the differential, naturally, on the rear axle. Many all-wheel and four-wheel drives add a center differential since power has to go to the front and rear wheels. (Some newer vehicles power wheels with electric motors, but that's a whole different story.)

Time and distance traveled eventually can take their toll on the differential, and you may notice some noises you hadn't heard when your vehicle was newer.  Sometimes you'll hear a whir that might change in pitch when you turn.  You may hear clicking sounds when you're moving.  Others describe rumbling sounds coming from underneath during a turn. Another symptom of possible differential problems may be vibrations or shakes the faster you go. 

All of these could be signs that you have problems with a differential. One common cause of differential problems is the gears aren't getting enough lubrication.

These can all have serious effects on your driving.  You may find it hard to turn, or your wheels may lock up. That could put you or drivers around you in a dangerous position. 

It's better to take care of differential problems before they get too serious.  Bring in your vehicle so we can have a technician check yours out.  They can see if there are any differential fluid leaks or failing gaskets.  In some cases, we may recommend your differential fluid be replaced.  And if there are any mechanical issues, some components may need to be replaced as well. 

When your differential is maintained, you'll be doing your vehicle a good turn.  

Auto Authority LLC
804 Witzel Ave
Oshkosh, WI 54902
920-231-1016
http://www.autoauthorityoshkosh.com

Passing the Test (How to Prevent Emissions Test Failure)

Vehicle emission testing has become ubiquitous in North America and for a good reason.  Clean air quality is important for the environment and all of us.  Since vehicle emissions are among the main causes of air pollution, emission testing can alert you to problems in your vehicle than can be fixed so it won't needlessly pollute.

Emissions tests are looking for certain toxic gases internal combustion engines produce, such as nitrogen oxide, particulate matter, non-methane organic gases and formaldehyde.  Emissions control systems reduce these gases if they are working properly. 

The best way to minimize pollution is to keep those vehicle systems working properly, and periodic inspection and maintenance is the key.  So if you want to make sure your vehicle will pass an emissions test, it helps to know what might go wrong.

Let's start on the easy one.  Your gas cap could be loose, allowing vapors to escape into the atmosphere.  The most common solution is to replace it.  Or your air filter may be dirty.  A dirty air filter may push your hydrocarbons pass the acceptable level.

Now to the more complicated things.  The mixture of fuel and air in your engine may be tilted toward the "too much fuel" side.  That could cause problems for your vehicle's catalytic converter, a device that converts toxic gases from your exhaust into less toxic pollutants.

Your vehicle has a closed system that prevents fuel tank vapors from escaping into the air; it's called the EVAP system.  A technician can track down problems.

Vehicle engineers have gone to great lengths to minimize the amount of pollution your vehicle produces.  Your vehicle's manufacturer recommends how frequently those systems need servicing.  Keep those systems in good shape and you're likely to pass emissions tests with flying colors.  Neglect them and you might find your vehicle failing an emissions test.  When that happens, you'll have to get the problems repaired before you can get back on the road.

Auto Authority LLC
804 Witzel Ave
Oshkosh, WI 54902
920-231-1016
http://www.autoauthorityoshkosh.com